Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-220.23.1.el6.x86_64 (mockbuild@c6b5.bsys.dev.centos.org) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Mon Jun 18 18:58:52 BST 2012
Command line: ro root=UUID=5fe23fbc-13b3-4d4d-917f-7b9155b5c90f nomodeset rd_NO_LUKS  KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_NO_MD  SYSFONT=latarcyrheb-sun16 rhgb crashkernel=auto rd_NO_LVM rd_NO_DM pcie_aspm=off biosdevname=0
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 0000000000097c00 (usable)
 BIOS-e820: 0000000000097c00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000be7a9000 (usable)
 BIOS-e820: 00000000be7a9000 - 00000000be7f5000 (ACPI NVS)
 BIOS-e820: 00000000be7f5000 - 00000000be7fd000 (ACPI data)
 BIOS-e820: 00000000be7fd000 - 00000000bf47b000 (reserved)
 BIOS-e820: 00000000bf47b000 - 00000000bf47c000 (ACPI NVS)
 BIOS-e820: 00000000bf47c000 - 00000000bf48d000 (reserved)
 BIOS-e820: 00000000bf48d000 - 00000000bf490000 (ACPI NVS)
 BIOS-e820: 00000000bf490000 - 00000000bf4b1000 (reserved)
 BIOS-e820: 00000000bf4b1000 - 00000000bf4b3000 (usable)
 BIOS-e820: 00000000bf4b3000 - 00000000bf504000 (reserved)
 BIOS-e820: 00000000bf504000 - 00000000bf50d000 (ACPI NVS)
 BIOS-e820: 00000000bf50d000 - 00000000bf533000 (reserved)
 BIOS-e820: 00000000bf533000 - 00000000bf576000 (ACPI NVS)
 BIOS-e820: 00000000bf576000 - 00000000bf800000 (usable)
 BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000840000000 (usable)
DMI 2.7 present.
SMBIOS version 2.7 @ 0xF0480
DMI: Supermicro X9SCI/X9SCA/X9SCI/X9SCA, BIOS 1.1a 09/28/2011
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x840000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-E7FFF uncachable
  E8000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask 800000000 write-back
  1 base 800000000 mask FC0000000 write-back
  2 base 0C0000000 mask FC0000000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 32GB, range: 1GB, type WB
reg 2, base: 3GB, range: 1GB, type UC
total RAM covered: 32768M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64K 	num_reg: 6  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
reg 4, base: 16GB, range: 16GB, type WB
reg 5, base: 32GB, range: 1GB, type WB
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf800000
 0000000000 - 00bf800000 page 2M
kernel direct mapping tables up to bf800000 @ 10000-14000
init_memory_mapping: 0000000100000000-0000000840000000
 0100000000 - 0840000000 page 2M
kernel direct mapping tables up to 840000000 @ 12000-34000
RAMDISK: 3711e000 - 37fef71a
ACPI: RSDP 00000000000f0450 00024 (v02 SUPERM)
ACPI: XSDT 00000000be7f5080 0007C (v01 SUPERM SMCI--MB 00000001 AMI  00010013)
ACPI: FACP 00000000be7fc400 000F4 (v04 SUPERM SMCI--MB 00000001 AMI  00010013)
ACPI: DSDT 00000000be7f5188 07272 (v02 SUPERM SMCI--MB 00000000 INTL 20051117)
ACPI: FACS 00000000bf50af80 00040
ACPI: APIC 00000000be7fc4f8 00092 (v03 SUPERM SMCI--MB 00000001 AMI  00010013)
ACPI: SSDT 00000000be7fc590 001D6 (v01 AMICPU     PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000be7fc768 0003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097)
ACPI: HPET 00000000be7fc7a8 00038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000004)
ACPI: SPMI 00000000be7fc7e0 00040 (v05 A M I   OEMSPMI 00000000 AMI. 00000000)
ACPI: DMAR 00000000be7fc820 000B0 (v01 ALASKA    A M I 00000001 INTL 00000001)
ACPI: EINJ 00000000be7fc8d0 00130 (v01    AMI AMI EINJ 00000000      00000000)
ACPI: ERST 00000000be7fca00 00210 (v01  AMIER AMI ERST 00000000      00000000)
ACPI: HEST 00000000be7fcc10 000A8 (v01    AMI AMI HEST 00000000      00000000)
ACPI: BERT 00000000be7fccb8 00030 (v01    AMI AMI BERT 00000000      00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000840000000
Bootmem setup node 0 0000000000000000-0000000840000000
  NODE_DATA [000000000002f000 - 0000000000062fff]
  bootmap [0000000000100000 -  0000000000207fff] pages 108
(8 early reservations) ==> bootmem [0000000000 - 0840000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 000200c864]    TEXT DATA BSS ==> [0001000000 - 000200c864]
  #3 [003711e000 - 0037fef71a]          RAMDISK ==> [003711e000 - 0037fef71a]
  #4 [0000097c00 - 0000100000]    BIOS reserved ==> [0000097c00 - 0000100000]
  #5 [000200d000 - 000200d3a8]              BRK ==> [000200d000 - 000200d3a8]
  #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
  #7 [0000012000 - 000002f000]          PGTABLE ==> [0000012000 - 000002f000]
found SMP MP-table at [ffff8800000fcf30] fcf30
Reserving 131MB of memory at 48MB for crashkernel (System RAM: 33792MB)
 [ffffea0000000000-ffffea000f7fffff] PMD -> [ffff880028600000-ffff880036ffffff] on node 0
 [ffffea000f800000-ffffea001cdfffff] PMD -> [ffff880038000000-ffff8800455fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00840000
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
    0: 0x00000010 -> 0x00000097
    0: 0x00000100 -> 0x000be7a9
    0: 0x000bf4b1 -> 0x000bf4b3
    0: 0x000bf576 -> 0x000bf800
    0: 0x00100000 -> 0x00840000
On node 0 totalpages: 8382908
  DMA zone: 56 pages used for memmap
  DMA zone: 138 pages reserved
  DMA zone: 3781 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 762477 pages, LIFO batch:31
  Normal zone: 103936 pages used for memmap
  Normal zone: 7498240 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000097000 - 0000000000098000
PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000be7a9000 - 00000000be7f5000
PM: Registered nosave memory: 00000000be7f5000 - 00000000be7fd000
PM: Registered nosave memory: 00000000be7fd000 - 00000000bf47b000
PM: Registered nosave memory: 00000000bf47b000 - 00000000bf47c000
PM: Registered nosave memory: 00000000bf47c000 - 00000000bf48d000
PM: Registered nosave memory: 00000000bf48d000 - 00000000bf490000
PM: Registered nosave memory: 00000000bf490000 - 00000000bf4b1000
PM: Registered nosave memory: 00000000bf4b3000 - 00000000bf504000
PM: Registered nosave memory: 00000000bf504000 - 00000000bf50d000
PM: Registered nosave memory: 00000000bf50d000 - 00000000bf533000
PM: Registered nosave memory: 00000000bf533000 - 00000000bf576000
PM: Registered nosave memory: 00000000bf800000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at bf800000 (gap: bf800000:3f51c000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s92632 r8192 d22056 u262144
pcpu-alloc: s92632 r8192 d22056 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8264498
Policy zone: Normal
Kernel command line: ro root=UUID=5fe23fbc-13b3-4d4d-917f-7b9155b5c90f nomodeset rd_NO_LUKS  KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_NO_MD  SYSFONT=latarcyrheb-sun16 rhgb crashkernel=131M@0M rd_NO_LVM rd_NO_DM pcie_aspm=off biosdevname=0
PCIe ASPM is disabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Queued invalidation will be enabled to support x2apic and Intr-remapping.
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 32839476k/34603008k available (5086k kernel code, 1071376k absent, 692156k reserved, 7227k data, 1244k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 268435456 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3392.324 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.64 BogoMIPS (lpj=3392324)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20793 entries in 82 pages
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
IOMMU fed91000: ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x000000bf499000 end: 0x000000bf4a7fff
DMAR: No ATSR found
IOAPIC id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
HPET id 0 under DRHD base 0xfed91000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Setting APIC routing to cluster x2apic
  alloc irq_desc for 24 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E31270 @ 3.40GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
Brought up 8 CPUs
Total of 8 processors activated (54270.65 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2616 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 17 
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: No dock devices found.
HEST: Table parsing has been initialized.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:16.0: reg 10 64bit mmio: [0xfb105000-0xfb10500f]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.1: reg 10 64bit mmio: [0xfb104000-0xfb10400f]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xfb102000-0xfb1023ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xfb101000-0xfb1013ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 14 io port: [0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 18 io port: [0xf090-0xf097]
pci 0000:00:1f.2: reg 1c io port: [0xf080-0xf083]
pci 0000:00:1f.2: reg 20 io port: [0xf070-0xf07f]
pci 0000:00:1f.2: reg 24 io port: [0xf060-0xf06f]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb100000-0xfb1000ff]
pci 0000:00:1f.3: reg 20 io port: [0x1180-0x119f]
pci 0000:00:1f.5: reg 10 io port: [0xf050-0xf057]
pci 0000:00:1f.5: reg 14 io port: [0xf040-0xf043]
pci 0000:00:1f.5: reg 18 io port: [0xf030-0xf037]
pci 0000:00:1f.5: reg 1c io port: [0xf020-0xf023]
pci 0000:00:1f.5: reg 20 io port: [0xf010-0xf01f]
pci 0000:00:1f.5: reg 24 io port: [0xf000-0xf00f]
pci 0000:01:00.0: reg 10 64bit mmio: [0xfb200000-0xfb3fffff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfb400000-0xfb47ffff]
pci 0000:01:00.0: supports D1
pci 0000:00:01.0: bridge 32bit mmio: [0xfb200000-0xfb4fffff]
pci 0000:03:00.0: reg 10 32bit mmio: [0xfb900000-0xfb91ffff]
pci 0000:03:00.0: reg 18 io port: [0xe000-0xe01f]
pci 0000:03:00.0: reg 1c 32bit mmio: [0xfb920000-0xfb923fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfb900000-0xfb9fffff]
pci 0000:04:00.0: reg 10 32bit mmio: [0xfb800000-0xfb81ffff]
pci 0000:04:00.0: reg 18 io port: [0xd000-0xd01f]
pci 0000:04:00.0: reg 1c 32bit mmio: [0xfb820000-0xfb823fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xfb800000-0xfb8fffff]
pci 0000:05:00.0: reg 10 32bit mmio: [0xfb700000-0xfb71ffff]
pci 0000:05:00.0: reg 18 io port: [0xc000-0xc01f]
pci 0000:05:00.0: reg 1c 32bit mmio: [0xfb720000-0xfb723fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.6: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.6: bridge 32bit mmio: [0xfb700000-0xfb7fffff]
pci 0000:06:00.0: reg 10 32bit mmio: [0xfb600000-0xfb61ffff]
pci 0000:06:00.0: reg 18 io port: [0xb000-0xb01f]
pci 0000:06:00.0: reg 1c 32bit mmio: [0xfb620000-0xfb623fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.7: bridge io port: [0xb000-0xbfff]
pci 0000:00:1c.7: bridge 32bit mmio: [0xfb600000-0xfb6fffff]
pci 0000:07:03.0: reg 10 32bit mmio pref: [0xf9000000-0xf9ffffff]
pci 0000:07:03.0: reg 14 32bit mmio: [0xfb000000-0xfb003fff]
pci 0000:07:03.0: reg 18 32bit mmio: [0xfa800000-0xfaffffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xfa800000-0xfb0fffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf9000000-0xf9ffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:07:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:01: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:05: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0xa00-0xa1f has been reserved
system 00:07: ioport range 0xa30-0xa3f has been reserved
system 00:0c: ioport range 0xb00-0xb7f has been reserved
system 00:0e: ioport range 0x400-0x453 has been reserved
system 00:0e: ioport range 0x458-0x47f has been reserved
system 00:0e: ioport range 0x1180-0x119f has been reserved
system 00:0e: ioport range 0x500-0x57f has been reserved
system 00:0e: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:0e: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:0e: iomem range 0xfed08000-0xfed08fff has been reserved
system 00:0e: iomem range 0xff000000-0xffffffff has been reserved
system 00:0f: ioport range 0x454-0x457 has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [0xfb200000-0xfb4fffff]
pci 0000:00:01.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   bridge window [io  disabled]
pci 0000:00:1c.0:   bridge window [mem disabled]
pci 0000:00:1c.0:   bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.4:   bridge window [0xe000-0xefff]
pci 0000:00:1c.4:   bridge window [0xfb900000-0xfb9fffff]
pci 0000:00:1c.4:   bridge window [mem pref disabled]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.5:   bridge window [0xd000-0xdfff]
pci 0000:00:1c.5:   bridge window [0xfb800000-0xfb8fffff]
pci 0000:00:1c.5:   bridge window [mem pref disabled]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.6:   bridge window [0xc000-0xcfff]
pci 0000:00:1c.6:   bridge window [0xfb700000-0xfb7fffff]
pci 0000:00:1c.6:   bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 06-06]
pci 0000:00:1c.7: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.7:   bridge window [0xb000-0xbfff]
pci 0000:00:1c.7:   bridge window [0xfb600000-0xfb6fffff]
pci 0000:00:1c.7:   bridge window [mem pref disabled]
pci 0000:00:1e.0: PCI bridge to [bus 07-07]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [0xfa800000-0xfb0fffff]
pci 0000:00:1e.0:   bridge window [0xf9000000-0xf9ffffff]
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 mem: [0xfb200000-0xfb4fffff]
pci_bus 0000:03: resource 0 io:  [0xe000-0xefff]
pci_bus 0000:03: resource 1 mem: [0xfb900000-0xfb9fffff]
pci_bus 0000:04: resource 0 io:  [0xd000-0xdfff]
pci_bus 0000:04: resource 1 mem: [0xfb800000-0xfb8fffff]
pci_bus 0000:05: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:05: resource 1 mem: [0xfb700000-0xfb7fffff]
pci_bus 0000:06: resource 0 io:  [0xb000-0xbfff]
pci_bus 0000:06: resource 1 mem: [0xfb600000-0xfb6fffff]
pci_bus 0000:07: resource 1 mem: [0xfa800000-0xfb0fffff]
pci_bus 0000:07: resource 2 pref mem [0xf9000000-0xf9ffffff]
pci_bus 0000:07: resource 3 io:  [0x00-0xffff]
pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:07:03.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 15173k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1340388122.762:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key CA2975F3E810BFBE
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 25 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:01.0: irq 25 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idleACPI: SSDT 00000000bf504d98 000EC (v01    AMI      CST 00000001 MSFT 03000001)
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
APEI: Can not request iomem region <00000000bf48d03e-00000000bf48d03f> for GARs.
[Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial8250: ttyS2 at I/O 0x3e8 (irq = 10) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0d: ttyS2 at I/O 0x3e8 (irq = 10) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfb102000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfb101000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-220.23.1.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2012-06-22 18:02:04 UTC (1340388124)
Initalizing network drop monitor service
Freeing unused kernel memory: 1244k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1040k freed
Freeing unused kernel memory: 1756k freed
dracut: dracut-004-256.el6_2.1
dracut: rd_NO_LUKS: removing cryptoluks activation
dracut: rd_NO_LVM: removing LVM activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
Adaptec aacraid driver 1.1-5[2461]-ms
aacraid 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
aacraid 0000:01:00.0: setting latency timer to 64
IRQ 16/aacraid: IRQF_DISABLED is not guaranteed on shared IRQs
Refined TSC clocksource calibration: 3392.293 MHz.
Switching to clocksource tsc
usb 1-1: new high speed USB device using ehci_hcd and address 2
AAC0: kernel 5.2-0[18948] Apr 13 2012
AAC0: monitor 5.2-0[18948]
AAC0: bios 5.2-0[18948]
AAC0: serial 2B0711E762F
AAC0: Non-DASD support enabled.
AAC0: 64bit support enabled.
AAC0: 64 Bit DAC enabled
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
scsi0 : aacraid
scsi 0:0:0:0: Direct-Access     Adaptec  RAID1-A          V1.0 PQ: 0 ANSI: 2
scsi 0:0:1:0: Direct-Access     Adaptec  RAID1-B          V1.0 PQ: 0 ANSI: 2
scsi 0:0:2:0: Direct-Access     Adaptec  RAID-2xSSD       V1.0 PQ: 0 ANSI: 2
scsi 0:1:0:0: Direct-Access              ST33000650NS     0004 PQ: 1 ANSI: 5
scsi 0:1:1:0: Direct-Access              ST33000650NS     0004 PQ: 1 ANSI: 5
scsi 0:1:2:0: Direct-Access              P300-MTFDDAC200S 0003 PQ: 1 ANSI: 5
scsi 0:1:3:0: Direct-Access              P300-MTFDDAC200S 0003 PQ: 1 ANSI: 5
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
usb 2-1: new high speed USB device using ehci_hcd and address 2
ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
ata2: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 1-1.2: new full speed USB device using ehci_hcd and address 3
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf010 irq 19
ata4: SATA max UDMA/133 cmd 0xf030 ctl 0xf020 bmdma 0xf018 irq 19
usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: Hermon USB hidmouse Device
usb 1-1.2: Manufacturer: Winbond Electronics Corp
usb 1-1.2: configuration #1 chosen from 1 choice
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input3
generic-usb 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input0
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input4
generic-usb 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input1
sd 0:0:0:0: [sda] 209694720 512-byte logical blocks: (107 GB/99.9 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 06 00 10 00
sd 0:0:2:0: [sdc] 390328320 512-byte logical blocks: (199 GB/186 GiB)
sd 0:0:1:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:2:0: [sdc] Write Protect is off
sd 0:0:1:0: [sdb] 5641316352 512-byte logical blocks: (2.88 TB/2.62 TiB)
sd 0:0:2:0: [sdc] Mode Sense: 06 00 10 00
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 06 00 10 00
sd 0:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 0:0:1:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
 sdc:
 sda:
 sdb: sda1 sda2 sda3
 unknown partition table
 unknown partition table
sd 0:0:2:0: [sdc] Attached SCSI removable disk
sd 0:0:1:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
sd 0:0:1:0: [sdb] Attached SCSI removable disk
sd 0:0:0:0: [sda] Attached SCSI removable disk
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: 
dracut: Mounted root filesystem /dev/sda3
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1340388125.945:2): selinux=0 auid=4294967295 ses=4294967295
dracut: 
dracut: Switching root
readahead: starting
udev: starting version 147
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:2:0: Attached scsi generic sg2 type 0
scsi 0:1:0:0: Attached scsi generic sg3 type 0
scsi 0:1:1:0: Attached scsi generic sg4 type 0
scsi 0:1:2:0: Attached scsi generic sg5 type 0
scsi 0:1:3:0: Attached scsi generic sg6 type 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0x1180-0x119f] conflicts with ACPI region SMIO [0x1180-0x119f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x1b
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x1b
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x1b
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x1b
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x1b
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x1b
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x1b
platform microcode: firmware: requesting intel-ucode/06-2a-07
microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x1b
platform microcode: firmware: requesting intel-ucode/06-2a-07
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:03:00.0: Disabling ASPM L0s 
e1000e 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:03:00.0: setting latency timer to 64
  alloc irq_desc for 26 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:03:00.0: irq 26 for MSI/MSI-X
  alloc irq_desc for 27 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:03:00.0: irq 27 for MSI/MSI-X
  alloc irq_desc for 28 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:03:00.0: irq 28 for MSI/MSI-X
e1000e 0000:03:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:50:39:a2
e1000e 0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:03:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:04:00.0: Disabling ASPM L0s 
e1000e 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:04:00.0: setting latency timer to 64
  alloc irq_desc for 29 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:04:00.0: irq 29 for MSI/MSI-X
  alloc irq_desc for 30 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:04:00.0: irq 30 for MSI/MSI-X
  alloc irq_desc for 31 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:04:00.0: irq 31 for MSI/MSI-X
e1000e 0000:04:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:50:39:a3
e1000e 0000:04:00.0: eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:04:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:05:00.0: Disabling ASPM L0s 
e1000e 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
e1000e 0000:05:00.0: setting latency timer to 64
  alloc irq_desc for 32 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:05:00.0: irq 32 for MSI/MSI-X
  alloc irq_desc for 33 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:05:00.0: irq 33 for MSI/MSI-X
  alloc irq_desc for 34 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:05:00.0: irq 34 for MSI/MSI-X
e1000e 0000:05:00.0: eth2: (PCI Express:2.5GT/s:Width x1) 00:25:90:50:39:a4
e1000e 0000:05:00.0: eth2: Intel(R) PRO/1000 Network Connection
e1000e 0000:05:00.0: eth2: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:06:00.0: Disabling ASPM L0s 
e1000e 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
e1000e 0000:06:00.0: setting latency timer to 64
  alloc irq_desc for 35 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:06:00.0: irq 35 for MSI/MSI-X
  alloc irq_desc for 36 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:06:00.0: irq 36 for MSI/MSI-X
  alloc irq_desc for 37 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:06:00.0: irq 37 for MSI/MSI-X
e1000e 0000:06:00.0: eth3: (PCI Express:2.5GT/s:Width x1) 00:25:90:50:39:a5
e1000e 0000:06:00.0: eth3: Intel(R) PRO/1000 Network Connection
e1000e 0000:06:00.0: eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
EXT4-fs (sdb): barriers disabled
EXT4-fs (sdb): mounted filesystem with writeback data mode. Opts: 
EXT4-fs (sdc): barriers disabled
EXT4-fs (sdc): mounted filesystem with writeback data mode. Opts: 
Adding 1048568k swap on /dev/sda2.  Priority:0 extents:1 across:1048568k 
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
p4-clockmod: Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible.
eth0: no IPv6 routers present
INFO: task flush-8:0:1093 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
flush-8:0     D 0000000000000000     0  1093      2 0x00000000
 ffff8808260959a0 0000000000000046 ffff880826095968 ffff880826095964
 ffff880826095a88 ffff88083fc24100 ffff880028315f80 00000000000007fd
 ffff8808272c8678 ffff880826095fd8 000000000000f4e8 ffff8808272c8678
Call Trace:
 [<ffffffff81110d60>] ? sync_page+0x0/0x50
 [<ffffffff814ed9e3>] io_schedule+0x73/0xc0
 [<ffffffff81110d9d>] sync_page+0x3d/0x50
 [<ffffffff814ee39f>] __wait_on_bit+0x5f/0x90
 [<ffffffff81110f53>] wait_on_page_bit+0x73/0x80
 [<ffffffff81090d70>] ? wake_bit_function+0x0/0x50
 [<ffffffff81127432>] ? pagevec_lookup+0x22/0x30
 [<ffffffff81128b9a>] truncate_inode_pages_range+0x2fa/0x460
 [<ffffffffa00a8fc0>] ? ext4_delete_inode+0x0/0x2d0 [ext4]
 [<ffffffff81128d15>] truncate_inode_pages+0x15/0x20
 [<ffffffffa00a900e>] ext4_delete_inode+0x4e/0x2d0 [ext4]
 [<ffffffff81191ace>] generic_delete_inode+0xde/0x1d0
 [<ffffffff81191c25>] generic_drop_inode+0x65/0x80
 [<ffffffff81190a72>] iput+0x62/0x70
 [<ffffffff811a0d70>] writeback_sb_inodes+0x100/0x180
 [<ffffffff811a0e9b>] writeback_inodes_wb+0xab/0x1b0
 [<ffffffff811a123b>] wb_writeback+0x29b/0x3f0
 [<ffffffff814ed250>] ? thread_return+0x4e/0x76e
 [<ffffffff8107cd62>] ? del_timer_sync+0x22/0x30
 [<ffffffff811a1529>] wb_do_writeback+0x199/0x240
 [<ffffffff811a1633>] bdi_writeback_task+0x63/0x1b0
 [<ffffffff81090bf7>] ? bit_waitqueue+0x17/0xd0
 [<ffffffff81134f90>] ? bdi_start_fn+0x0/0x100
 [<ffffffff81135016>] bdi_start_fn+0x86/0x100
 [<ffffffff81134f90>] ? bdi_start_fn+0x0/0x100
 [<ffffffff810909c6>] kthread+0x96/0xa0
 [<ffffffff8100c14a>] child_rip+0xa/0x20
 [<ffffffff81090930>] ? kthread+0x0/0xa0
 [<ffffffff8100c140>] ? child_rip+0x0/0x20
INFO: task dbench:23205 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
dbench        D 0000000000000007     0 23205  23146 0x00000000
 ffff8808289e7a18 0000000000000082 0000000000000000 ffff8807fefeb750
 ffff8808289e7a58 ffffffffa00741c4 ffff8808289e7a08 ffff8808289e79e8
 ffff88082a807ab8 ffff8808289e7fd8 000000000000f4e8 ffff88082a807ab8
Call Trace:
 [<ffffffffa00741c4>] ? do_get_write_access+0x3b4/0x520 [jbd2]
 [<ffffffff8109b949>] ? ktime_get_ts+0xa9/0xe0
 [<ffffffff81110d60>] ? sync_page+0x0/0x50
 [<ffffffff814ed9e3>] io_schedule+0x73/0xc0
 [<ffffffff81110d9d>] sync_page+0x3d/0x50
 [<ffffffff814ee39f>] __wait_on_bit+0x5f/0x90
 [<ffffffff81110f53>] wait_on_page_bit+0x73/0x80
 [<ffffffff81090d70>] ? wake_bit_function+0x0/0x50
 [<ffffffff811273f5>] ? pagevec_lookup_tag+0x25/0x40
 [<ffffffffa00a6968>] write_cache_pages_da+0x1a8/0x480 [ext4]
 [<ffffffffa00733c5>] ? jbd2_journal_start+0xb5/0x100 [jbd2]
 [<ffffffffa00a6f1b>] ext4_da_writepages+0x2db/0x660 [ext4]
 [<ffffffffa00741c4>] ? do_get_write_access+0x3b4/0x520 [jbd2]
 [<ffffffff811265a1>] do_writepages+0x21/0x40
 [<ffffffff811114bb>] __filemap_fdatawrite_range+0x5b/0x60
 [<ffffffff81111a43>] filemap_fdatawrite_range+0x13/0x20
 [<ffffffffa0072136>] jbd2_journal_begin_ordered_truncate+0xa6/0xc0 [jbd2]
 [<ffffffff811b6092>] ? fsnotify_clear_marks_by_inode+0x32/0xf0
 [<ffffffffa00a8fc0>] ? ext4_delete_inode+0x0/0x2d0 [ext4]
 [<ffffffffa00a928b>] ext4_delete_inode+0x2cb/0x2d0 [ext4]
 [<ffffffff81191ace>] generic_delete_inode+0xde/0x1d0
 [<ffffffff81191c25>] generic_drop_inode+0x65/0x80
 [<ffffffff81190a72>] iput+0x62/0x70
 [<ffffffff811869b2>] do_unlinkat+0x112/0x1c0
 [<ffffffff8117bee6>] ? sys_newstat+0x36/0x50
 [<ffffffff81186a76>] sys_unlink+0x16/0x20
 [<ffffffff8100b0f2>] system_call_fastpath+0x16/0x1b
INFO: task dbench:23234 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
dbench        D 0000000000000007     0 23234  23146 0x00000000
 ffff8808284f3df8 0000000000000082 0000000000000000 ffff88077cba65e8
 ffffea001ab85690 ffff8808284f3de8 0000000000000000 00000000fffffffb
 ffff880828682678 ffff8808284f3fd8 000000000000f4e8 ffff880828682678
Call Trace:
 [<ffffffffa007a5c5>] jbd2_log_wait_commit+0xc5/0x140 [jbd2]
 [<ffffffff81090d30>] ? autoremove_wake_function+0x0/0x40
 [<ffffffffa007a676>] ? __jbd2_log_start_commit+0x36/0x40 [jbd2]
 [<ffffffffa009e09c>] ext4_sync_file+0x13c/0x250 [ext4]
 [<ffffffff811a58c1>] vfs_fsync_range+0xa1/0xe0
 [<ffffffff811a596d>] vfs_fsync+0x1d/0x20
 [<ffffffff811a59ae>] do_fsync+0x3e/0x60
 [<ffffffff811a5a00>] sys_fsync+0x10/0x20
 [<ffffffff8100b0f2>] system_call_fastpath+0x16/0x1b
INFO: task dbench:23236 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
dbench        D 0000000000000001     0 23236  23146 0x00000000
 ffff880827cadc28 0000000000000082 ffff88076cec84c0 00000000008022d7
 ffff880827cadbe8 ffff88000003fd80 ffff880827cadbb8 0000000000000450
 ffff88082976f0f8 ffff880827cadfd8 000000000000f4e8 ffff88082976f0f8
Call Trace:
 [<ffffffff8109b949>] ? ktime_get_ts+0xa9/0xe0
 [<ffffffff81110d60>] ? sync_page+0x0/0x50
 [<ffffffff814ed9e3>] io_schedule+0x73/0xc0
 [<ffffffff81110d9d>] sync_page+0x3d/0x50
 [<ffffffff814ee39f>] __wait_on_bit+0x5f/0x90
 [<ffffffff81110f53>] wait_on_page_bit+0x73/0x80
 [<ffffffff81090d70>] ? wake_bit_function+0x0/0x50
 [<ffffffff81127432>] ? pagevec_lookup+0x22/0x30
 [<ffffffff81128b9a>] truncate_inode_pages_range+0x2fa/0x460
 [<ffffffffa00a8fc0>] ? ext4_delete_inode+0x0/0x2d0 [ext4]
 [<ffffffff81128d15>] truncate_inode_pages+0x15/0x20
 [<ffffffffa00a900e>] ext4_delete_inode+0x4e/0x2d0 [ext4]
 [<ffffffff81191ace>] generic_delete_inode+0xde/0x1d0
 [<ffffffff81191c25>] generic_drop_inode+0x65/0x80
 [<ffffffff81190a72>] iput+0x62/0x70
 [<ffffffff811869b2>] do_unlinkat+0x112/0x1c0
 [<ffffffff8117bee6>] ? sys_newstat+0x36/0x50
 [<ffffffff81186a76>] sys_unlink+0x16/0x20
 [<ffffffff8100b0f2>] system_call_fastpath+0x16/0x1b
INFO: task dbench:23239 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
dbench        D 0000000000000006     0 23239  23146 0x00000000
 ffff880827c51df8 0000000000000086 0000000000000000 ffff8807755f7de8
 ffffea00197488c8 ffff880827c51de8 0000000000000000 00000000fffffffb
 ffff880829741038 ffff880827c51fd8 000000000000f4e8 ffff880829741038
Call Trace:
 [<ffffffffa007a5c5>] jbd2_log_wait_commit+0xc5/0x140 [jbd2]
 [<ffffffff81090d30>] ? autoremove_wake_function+0x0/0x40
 [<ffffffffa007a676>] ? __jbd2_log_start_commit+0x36/0x40 [jbd2]
 [<ffffffffa009e09c>] ext4_sync_file+0x13c/0x250 [ext4]
 [<ffffffff811a58c1>] vfs_fsync_range+0xa1/0xe0
 [<ffffffff811a596d>] vfs_fsync+0x1d/0x20
 [<ffffffff811a59ae>] do_fsync+0x3e/0x60
 [<ffffffff811a5a00>] sys_fsync+0x10/0x20
 [<ffffffff8100b0f2>] system_call_fastpath+0x16/0x1b
INFO: task dbench:23339 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
dbench        D 0000000000000006     0 23339  23307 0x00000000
 ffff88082aec5df8 0000000000000082 ffff88082aec5da8 ffff88079ae7c9e8
 ffffea001977a188 ffff88082aec5de8 0000000000000000 00000000fffffffb
 ffff880829f65038 ffff88082aec5fd8 000000000000f4e8 ffff880829f65038
Call Trace:
 [<ffffffff8109101e>] ? prepare_to_wait+0x4e/0x80
 [<ffffffffa007a5c5>] jbd2_log_wait_commit+0xc5/0x140 [jbd2]
 [<ffffffff81090d30>] ? autoremove_wake_function+0x0/0x40
 [<ffffffffa007a676>] ? __jbd2_log_start_commit+0x36/0x40 [jbd2]
 [<ffffffffa009e09c>] ext4_sync_file+0x13c/0x250 [ext4]
 [<ffffffff811a58c1>] vfs_fsync_range+0xa1/0xe0
 [<ffffffff811a596d>] vfs_fsync+0x1d/0x20
 [<ffffffff811a59ae>] do_fsync+0x3e/0x60
 [<ffffffff811a5a00>] sys_fsync+0x10/0x20
 [<ffffffff8100b0f2>] system_call_fastpath+0x16/0x1b
INFO: task dbench:23410 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
dbench        D 0000000000000007     0 23410  23307 0x00000000
 ffff88082a5dddf8 0000000000000082 ffff88082a5ddda8 ffff88075d8af5e8
 ffffea00194c1288 ffff88082a5ddde8 0000000000000000 00000000fffffffb
 ffff88082aded0b8 ffff88082a5ddfd8 000000000000f4e8 ffff88082aded0b8
Call Trace:
 [<ffffffff8109101e>] ? prepare_to_wait+0x4e/0x80
 [<ffffffffa007a5c5>] jbd2_log_wait_commit+0xc5/0x140 [jbd2]
 [<ffffffff81090d30>] ? autoremove_wake_function+0x0/0x40
 [<ffffffffa007a676>] ? __jbd2_log_start_commit+0x36/0x40 [jbd2]
 [<ffffffffa009e09c>] ext4_sync_file+0x13c/0x250 [ext4]
 [<ffffffff811a58c1>] vfs_fsync_range+0xa1/0xe0
 [<ffffffff811a596d>] vfs_fsync+0x1d/0x20
 [<ffffffff811a59ae>] do_fsync+0x3e/0x60
 [<ffffffff811a5a00>] sys_fsync+0x10/0x20
 [<ffffffff8100b0f2>] system_call_fastpath+0x16/0x1b
INFO: task jbd2/sda3-8:462 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
jbd2/sda3-8   D 0000000000000005     0   462      2 0x00000000
 ffff88082628ba80 0000000000000046 0000000000000000 0000000000000441
 ffff88082628b9f0 ffffffff81012b59 ffff88082628ba30 ffffffff8109b949
 ffff880826a4f038 ffff88082628bfd8 000000000000f4e8 ffff880826a4f038
Call Trace:
 [<ffffffff81012b59>] ? read_tsc+0x9/0x20
 [<ffffffff8109b949>] ? ktime_get_ts+0xa9/0xe0
 [<ffffffff8109b949>] ? ktime_get_ts+0xa9/0xe0
 [<ffffffff81110d60>] ? sync_page+0x0/0x50
 [<ffffffff814ed9e3>] io_schedule+0x73/0xc0
 [<ffffffff81110d9d>] sync_page+0x3d/0x50
 [<ffffffff814ee39f>] __wait_on_bit+0x5f/0x90
 [<ffffffff81110f53>] wait_on_page_bit+0x73/0x80
 [<ffffffff81090d70>] ? wake_bit_function+0x0/0x50
 [<ffffffff811273f5>] ? pagevec_lookup_tag+0x25/0x40
 [<ffffffff8112622b>] write_cache_pages+0x17b/0x4a0
 [<ffffffff81053174>] ? check_preempt_wakeup+0x1a4/0x260
 [<ffffffff81124ed0>] ? __writepage+0x0/0x40
 [<ffffffff8105e89c>] ? try_to_wake_up+0x24c/0x3e0
 [<ffffffff81126574>] generic_writepages+0x24/0x30
 [<ffffffffa00744e7>] journal_submit_inode_data_buffers+0x47/0x50 [jbd2]
 [<ffffffffa00749f5>] jbd2_journal_commit_transaction+0x375/0x14b0 [jbd2]
 [<ffffffff8100975d>] ? __switch_to+0x13d/0x320
 [<ffffffff8107c24c>] ? lock_timer_base+0x3c/0x70
 [<ffffffff81090d30>] ? autoremove_wake_function+0x0/0x40
 [<ffffffffa007a968>] kjournald2+0xb8/0x220 [jbd2]
 [<ffffffff81090d30>] ? autoremove_wake_function+0x0/0x40
 [<ffffffffa007a8b0>] ? kjournald2+0x0/0x220 [jbd2]
 [<ffffffff810909c6>] kthread+0x96/0xa0
 [<ffffffff8100c14a>] child_rip+0xa/0x20
 [<ffffffff81090930>] ? kthread+0x0/0xa0
 [<ffffffff8100c140>] ? child_rip+0x0/0x20
INFO: task flush-8:0:1093 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
flush-8:0     D 0000000000000003     0  1093      2 0x00000000
 ffff880826095610 0000000000000046 0000000000000000 ffffffffa00741c4
 ffff88082601b000 ffff8808272c80c0 0000000000000001 0000000000000003
 ffff8808272c8678 ffff880826095fd8 000000000000f4e8 ffff8808272c8678
Call Trace:
 [<ffffffffa00741c4>] ? do_get_write_access+0x3b4/0x520 [jbd2]
 [<ffffffff814ed9e3>] io_schedule+0x73/0xc0
 [<ffffffff81251b6d>] get_request_wait+0xcd/0x1a0
 [<ffffffff81090d30>] ? autoremove_wake_function+0x0/0x40
 [<ffffffff81248497>] ? elv_merge+0x37/0x200
 [<ffffffff81251cbd>] __make_request+0x7d/0x5a0
 [<ffffffff812505b2>] generic_make_request+0x2b2/0x5c0
 [<ffffffff81090d1f>] ? wake_up_bit+0x2f/0x40
 [<ffffffff8125094f>] submit_bio+0x8f/0x120
 [<ffffffff811a8636>] submit_bh+0xf6/0x150
 [<ffffffff811aa3a0>] __block_write_full_page+0x1e0/0x3b0
 [<ffffffff811a9ce0>] ? end_buffer_async_write+0x0/0x190
 [<ffffffffa00a5a20>] ? noalloc_get_block_write+0x0/0x60 [ext4]
 [<ffffffffa00a5a20>] ? noalloc_get_block_write+0x0/0x60 [ext4]
 [<ffffffff811aafe0>] block_write_full_page_endio+0xe0/0x120
 [<ffffffffa00a0aa0>] ? ext4_bh_delay_or_unwritten+0x0/0x30 [ext4]
 [<ffffffff811ab035>] block_write_full_page+0x15/0x20
 [<ffffffffa00a385a>] ext4_writepage+0xda/0x3b0 [ext4]
 [<ffffffffa00a1cdc>] mpage_da_submit_io+0x14c/0x1d0 [ext4]
 [<ffffffffa00a7059>] ext4_da_writepages+0x419/0x660 [ext4]
 [<ffffffff811265a1>] do_writepages+0x21/0x40
 [<ffffffff811a08fd>] writeback_single_inode+0xdd/0x2c0
 [<ffffffff811a0d3e>] writeback_sb_inodes+0xce/0x180
 [<ffffffff811a0e9b>] writeback_inodes_wb+0xab/0x1b0
 [<ffffffff811a123b>] wb_writeback+0x29b/0x3f0
 [<ffffffff814ed250>] ? thread_return+0x4e/0x76e
 [<ffffffff8107cd62>] ? del_timer_sync+0x22/0x30
 [<ffffffff811a1529>] wb_do_writeback+0x199/0x240
 [<ffffffff811a1633>] bdi_writeback_task+0x63/0x1b0
 [<ffffffff81090bf7>] ? bit_waitqueue+0x17/0xd0
 [<ffffffff81134f90>] ? bdi_start_fn+0x0/0x100
 [<ffffffff81135016>] bdi_start_fn+0x86/0x100
 [<ffffffff81134f90>] ? bdi_start_fn+0x0/0x100
 [<ffffffff810909c6>] kthread+0x96/0xa0
 [<ffffffff8100c14a>] child_rip+0xa/0x20
 [<ffffffff81090930>] ? kthread+0x0/0xa0
 [<ffffffff8100c140>] ? child_rip+0x0/0x20
INFO: task spooler:1881 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
spooler       D 0000000000000007     0  1881   1868 0x00000000
 ffff8808297d9818 0000000000000086 0000000000000000 ffffffffa00741c4
 ffff88082601b000 ffff880826868040 0000000000000001 0000000000000003
 ffff8808268685f8 ffff8808297d9fd8 000000000000f4e8 ffff8808268685f8
Call Trace:
 [<ffffffffa00741c4>] ? do_get_write_access+0x3b4/0x520 [jbd2]
 [<ffffffff814ed9e3>] io_schedule+0x73/0xc0
 [<ffffffff81251b6d>] get_request_wait+0xcd/0x1a0
 [<ffffffff81090d30>] ? autoremove_wake_function+0x0/0x40
 [<ffffffff8124862b>] ? elv_merge+0x1cb/0x200
 [<ffffffff81251cbd>] __make_request+0x7d/0x5a0
 [<ffffffff812505b2>] generic_make_request+0x2b2/0x5c0
 [<ffffffff81090d1f>] ? wake_up_bit+0x2f/0x40
 [<ffffffff8125094f>] submit_bio+0x8f/0x120
 [<ffffffff811a8636>] submit_bh+0xf6/0x150
 [<ffffffff811aa3a0>] __block_write_full_page+0x1e0/0x3b0
 [<ffffffff811a9ce0>] ? end_buffer_async_write+0x0/0x190
 [<ffffffffa00a5a20>] ? noalloc_get_block_write+0x0/0x60 [ext4]
 [<ffffffffa00a5a20>] ? noalloc_get_block_write+0x0/0x60 [ext4]
 [<ffffffff811aafe0>] block_write_full_page_endio+0xe0/0x120
 [<ffffffffa00a0aa0>] ? ext4_bh_delay_or_unwritten+0x0/0x30 [ext4]
 [<ffffffff811ab035>] block_write_full_page+0x15/0x20
 [<ffffffffa00a385a>] ext4_writepage+0xda/0x3b0 [ext4]
 [<ffffffffa00a1cdc>] mpage_da_submit_io+0x14c/0x1d0 [ext4]
 [<ffffffffa00733c5>] ? jbd2_journal_start+0xb5/0x100 [jbd2]
 [<ffffffffa00a7059>] ext4_da_writepages+0x419/0x660 [ext4]
 [<ffffffff811127f0>] ? generic_file_aio_read+0x380/0x700
 [<ffffffff811265a1>] do_writepages+0x21/0x40
 [<ffffffff811114bb>] __filemap_fdatawrite_range+0x5b/0x60
 [<ffffffff8111199c>] filemap_flush+0x1c/0x20
 [<ffffffffa00a1dce>] ext4_alloc_da_blocks+0x4e/0x80 [ext4]
 [<ffffffffa009d9d1>] ext4_release_file+0x81/0xd0 [ext4]
 [<ffffffff811782e5>] __fput+0xf5/0x210
 [<ffffffff81178425>] fput+0x25/0x30
 [<ffffffff81173e6d>] filp_close+0x5d/0x90
 [<ffffffff81173f45>] sys_close+0xa5/0x100
 [<ffffffff8100b0f2>] system_call_fastpath+0x16/0x1b
EXT4-fs (sda3): Unaligned AIO/DIO on inode 530268 by fio; performance will be poor.
fio[23807]: segfault at 0 ip 0000000000417ad0 sp 00007fff325c6b60 error 6 in fio[400000+31000]
